---------------------------------------------------------------------------------------------------- -- -- Configuration for Module
ocumentation -- -- Here you can set the values of the parameters and messages used in Moduleocumentation to -- localise it to your wiki and your language. Unless specified otherwise, values given here -- should be string values. ---------------------------------------------------------------------------------------------------- local cfg = {} -- Do not edit this line. ---------------------------------------------------------------------------------------------------- -- Protection template configuration ---------------------------------------------------------------------------------------------------- -- cfg['protection-reason-edit'] -- The protection reason for edit-protected templates to pass to -- Module
rotection banner. cfg['protection-reason-edit'] = 'şablon' --[[ ---------------------------------------------------------------------------------------------------- -- Sandbox notice configuration -- -- On sandbox pages the module can display a template notifying users that the current page is a -- sandbox, and the location of test cases pages, etc. The module decides whether the page is a -- sandbox or not based on the value of cfg['sandbox-subpage']. The following settings configure the -- messages that the notices contains. ---------------------------------------------------------------------------------------------------- --]] -- cfg['sandbox-notice-image'] -- The image displayed in the sandbox notice. cfg['sandbox-notice-image'] = '50px|alt=|link=' --[[ -- cfg['sandbox-notice-pagetype-template'] -- cfg['sandbox-notice-pagetype-module'] -- cfg['sandbox-notice-pagetype-other'] -- The page type of the sandbox page. The message that is displayed depends on the current subject -- namespace. This message is used in either cfg['sandbox-notice-blurb'] or -- cfg['sandbox-notice-diff-blurb']. --]] cfg['sandbox-notice-pagetype-template'] = 'deneme tahtasıdır' cfg['sandbox-notice-pagetype-module'] = 'deneme tahtasıdır' cfg['sandbox-notice-pagetype-other'] = 'deneme tahtası' --[[ -- cfg['sandbox-notice-blurb'] -- cfg['sandbox-notice-diff-blurb'] -- cfg['sandbox-notice-diff-display'] -- Either cfg['sandbox-notice-blurb'] or cfg['sandbox-notice-diff-blurb'] is the opening sentence -- of the sandbox notice. The latter has a diff link, but the former does not. $1 is the page -- type, which is either cfg['sandbox-notice-pagetype-template'], -- cfg['sandbox-notice-pagetype-module'] or cfg['sandbox-notice-pagetype-other'] depending what -- namespace we are in. $2 is a link to the main template page, and $3 is a diff link between -- the sandbox and the main template. The display value of the diff link is set by -- cfg['sandbox-notice-compare-link-display']. --]] cfg['sandbox-notice-blurb'] = 'Bu sayfa $2 şablonunun $1.' cfg['sandbox-notice-diff-blurb'] = 'Bu sayfa $2 ($3) şablonunun $1.' cfg['sandbox-notice-compare-link-display'] = 'fark' --[[ -- cfg['sandbox-notice-testcases-blurb'] -- cfg['sandbox-notice-testcases-link-display'] -- cfg['sandbox-notice-testcases-run-blurb'] -- cfg['sandbox-notice-testcases-run-link-display'] -- cfg['sandbox-notice-testcases-blurb'] is a sentence notifying the user that there is a test cases page -- corresponding to this sandbox that they can edit. $1 is a link to the test cases page. -- cfg['sandbox-notice-testcases-link-display'] is the display value for that link. -- cfg['sandbox-notice-testcases-run-blurb'] is a sentence notifying the user that there is a test cases page -- corresponding to this sandbox that they can edit, along with a link to run it. $1 is a link to the test -- cases page, and $2 is a link to the page to run it. -- cfg['sandbox-notice-testcases-run-link-display'] is the display value for the link to run the test -- cases. --]] cfg['sandbox-notice-testcases-blurb'] = 'Yapılan değişiklikler $1 sayfasında sınanabilir.' cfg['sandbox-notice-testcases-link-display'] = 'test senaryosu' cfg['sandbox-notice-testcases-run-blurb'] = 'Yapılan değişiklikler $1 ($2) sayfasında sınanabilir.' cfg['sandbox-notice-testcases-run-link-display'] = 'çalıştır' -- cfg['sandbox-category'] -- A category to add to all template sandboxes. cfg['sandbox-category'] = 'Şablon deneme tahtaları' ---------------------------------------------------------------------------------------------------- -- Start box configuration ---------------------------------------------------------------------------------------------------- -- cfg['documentation-icon-wikitext'] -- The wikitext for the icon shown at the top of the template. cfg['documentation-icon-wikitext'] = '50px|link=|alt=' -- cfg['template-namespace-heading'] -- The heading shown in the template namespace. cfg['template-namespace-heading'] = 'Şablon belgelemesi' -- cfg['module-namespace-heading'] -- The heading shown in the module namespace. cfg['module-namespace-heading'] = 'Modül belgelemesi' -- cfg['file-namespace-heading'] -- The heading shown in the file namespace. cfg['file-namespace-heading'] = 'Özet' -- cfg['other-namespaces-heading'] -- The heading shown in other namespaces. cfg['other-namespaces-heading'] = 'Belgeleme' -- cfg['view-link-display'] -- The text to display for "view" links. cfg['view-link-display'] = 'gör' -- cfg['edit-link-display'] -- The text to display for "edit" links. cfg['edit-link-display'] = 'değiştir' -- cfg['history-link-display'] -- The text to display for "history" links. cfg['history-link-display'] = 'geçmiş' -- cfg['purge-link-display'] -- The text to display for "purge" links. cfg['purge-link-display'] = 'temizle' -- cfg['create-link-display'] -- The text to display for "create" links. cfg['create-link-display'] = 'oluştur' ---------------------------------------------------------------------------------------------------- -- Link box (end box) configuration ---------------------------------------------------------------------------------------------------- -- cfg['transcluded-from-blurb'] -- Notice displayed when the docs are transcluded from another page. $1 is a wikilink to that page. cfg['transcluded-from-blurb'] = 'Yukarıdaki belgeleme içeriği $1 sayfasından yansıtılmaktadır.' --[[ -- cfg['create-module-doc-blurb'] -- Notice displayed in the module namespace when the documentation subpage does not exist. -- $1 is a link to create the documentation page with the preload cfg['module-preload'] and the -- display cfg['create-link-display']. --]] cfg['create-module-doc-blurb'] = 'Bu Scribunto modülü için bir belgeleme sayfası $1mak isteyebilirsiniz.' ---------------------------------------------------------------------------------------------------- -- Experiment blurb configuration ---------------------------------------------------------------------------------------------------- --[[ -- cfg['experiment-blurb-template'] -- cfg['experiment-blurb-module'] -- The experiment blurb is the text inviting editors to experiment in sandbox and test cases pages. -- It is only shown in the template and module namespaces. With the default English settings, it -- might look like this: -- -- Editors can experiment in this template's sandbox (edit | diff) and testcases (edit) pages. -- -- In this example, "sandbox", "edit", "diff", "testcases", and "edit" would all be links. -- -- There are two versions, cfg['experiment-blurb-template'] and cfg['experiment-blurb-module'], depending -- on what namespace we are in. -- -- Parameters: -- -- $1 is a link to the sandbox page. If the sandbox exists, it is in the following format: -- -- cfg['sandbox-link-display'] (cfg['sandbox-edit-link-display'] | cfg['compare-link-display']) -- -- If the sandbox doesn't exist, it is in the format: -- -- cfg['sandbox-link-display'] (cfg['sandbox-create-link-display'] | cfg['mirror-link-display']) -- -- The link for cfg['sandbox-create-link-display'] link preloads the page with cfg['template-sandbox-preload'] -- or cfg['module-sandbox-preload'], depending on the current namespace. The link for cfg['mirror-link-display'] -- loads a default edit summary of cfg['mirror-edit-summary']. -- -- $2 is a link to the test cases page. If the test cases page exists, it is in the following format: -- -- cfg['testcases-link-display'] (cfg['testcases-edit-link-display'] | cfg['testcases-run-link-display']) -- -- If the test cases page doesn't exist, it is in the format: -- -- cfg['testcases-link-display'] (cfg['testcases-create-link-display']) -- -- If the test cases page doesn't exist, the link for cfg['testcases-create-link-display'] preloads the -- page with cfg['template-testcases-preload'] or cfg['module-testcases-preload'], depending on the current -- namespace. --]] cfg['experiment-blurb-template'] = "Kullanıcılar denemelerini bu şablonun $1 ve $2 sayfalarında yapabilirler." cfg['experiment-blurb-module'] = "Kullanıcılar denemelerini bu şablonun $1 ve $2 sayfalarında yapabilirler." ---------------------------------------------------------------------------------------------------- -- Sandbox link configuration ---------------------------------------------------------------------------------------------------- -- cfg['sandbox-subpage'] -- The name of the template subpage typically used for sandboxes. cfg['sandbox-subpage'] = 'deneme' -- cfg['template-sandbox-preload'] -- Preload file for template sandbox pages. cfg['template-sandbox-preload'] = 'Şablon:Belgeleme/deneme-önyükleme' -- cfg['module-sandbox-preload'] -- Preload file for Lua module sandbox pages. cfg['module-sandbox-preload'] = 'Şablon:Belgeleme/modül-deneme-önyükleme' -- cfg['sandbox-link-display'] -- The text to display for "sandbox" links. cfg['sandbox-link-display'] = 'deneme tahtası' -- cfg['sandbox-edit-link-display'] -- The text to display for sandbox "edit" links. cfg['sandbox-edit-link-display'] = 'değiştir' -- cfg['sandbox-create-link-display'] -- The text to display for sandbox "create" links. cfg['sandbox-create-link-display'] = 'oluştur' -- cfg['compare-link-display'] -- The text to display for "compare" links. cfg['compare-link-display'] = 'fark' -- cfg['mirror-edit-summary'] -- The default edit summary to use when a user clicks the "mirror" link. $1 is a wikilink to the -- template page. cfg['mirror-edit-summary'] = '$1 için bir deneme versiyonu oluşturuldu' -- cfg['mirror-link-display'] -- The text to display for "mirror" links. cfg['mirror-link-display'] = 'yansıtma' -- cfg['mirror-link-preload'] -- The page to preload when a user clicks the "mirror" link. cfg['mirror-link-preload'] = 'Şablon:Belgeleme/yansıtma' ---------------------------------------------------------------------------------------------------- -- Test cases link configuration ---------------------------------------------------------------------------------------------------- -- cfg['testcases-subpage'] -- The name of the template subpage typically used for test cases. cfg['testcases-subpage'] = 'test' -- cfg['template-testcases-preload'] -- Preload file for template test cases pages. cfg['template-testcases-preload'] = 'Şablon:Belgeleme/test-önyükleme' -- cfg['module-testcases-preload'] -- Preload file for Lua module test cases pages. cfg['module-testcases-preload'] = 'Şablon:Belgeleme/modül-test-önyükleme' -- cfg['testcases-link-display'] -- The text to display for "testcases" links. cfg['testcases-link-display'] = 'test senaryosu' -- cfg['testcases-edit-link-display'] -- The text to display for test cases "edit" links. cfg['testcases-edit-link-display'] = 'değiştir' -- cfg['testcases-run-link-display'] -- The text to display for test cases "run" links. cfg['testcases-run-link-display'] = 'çalıştır' -- cfg['testcases-create-link-display'] -- The text to display for test cases "create" links. cfg['testcases-create-link-display'] = 'oluştur' ---------------------------------------------------------------------------------------------------- -- Add categories blurb configuration ---------------------------------------------------------------------------------------------------- --[[ -- cfg['add-categories-blurb'] -- Text to direct users to add categories to the /doc subpage. Not used if the "content" or -- "docname fed" arguments are set, as then it is not clear where to add the categories. $1 is a -- link to the /doc subpage with a display value of cfg['doc-link-display']. --]] cfg['add-categories-blurb'] = 'Lütfen kategorileri $1 alt sayfasına ekleyin.' -- cfg['doc-link-display'] -- The text to display when linking to the /doc subpage. cfg['doc-link-display'] = '/belge' ---------------------------------------------------------------------------------------------------- -- Subpages link configuration ---------------------------------------------------------------------------------------------------- --[[ -- cfg['subpages-blurb'] -- The "Subpages of this template" blurb. $1 is a link to the main template's subpages with a -- display value of cfg['subpages-link-display']. In the English version this blurb is simply -- the link followed by a period, and the link display provides the actual text. --]] cfg['subpages-blurb'] = '$1.' --[[ -- cfg['subpages-link-display'] -- The text to display for the "subpages of this page" link. $1 is cfg['template-pagetype'], -- cfg['module-pagetype'] or cfg['default-pagetype'], depending on whether the current page is in -- the template namespace, the module namespace, or another namespace. --]] cfg['subpages-link-display'] = 'Bu $1 ile ilgili alt sayfalar için buraya tıklayınız' -- cfg['template-pagetype'] -- The pagetype to display for template pages. cfg['template-pagetype'] = 'şablon' -- cfg['module-pagetype'] -- The pagetype to display for Lua module pages. cfg['module-pagetype'] = 'modül' -- cfg['default-pagetype'] -- The pagetype to display for pages other than templates or Lua modules. cfg['default-pagetype'] = 'sayfa' ---------------------------------------------------------------------------------------------------- -- Doc link configuration ---------------------------------------------------------------------------------------------------- -- cfg['doc-subpage'] -- The name of the subpage typically used for documentation pages. cfg['doc-subpage'] = 'belge' -- cfg['file-docpage-preload'] -- Preload file for documentation page in the file namespace. cfg['file-docpage-preload'] = 'Şablon:Belgeleme/dosyaalanı-önyükleme' -- cfg['docpage-preload'] -- Preload file for template documentation pages in all namespaces. cfg['docpage-preload'] = 'Şablon:Belgeleme/önyükleme' -- cfg['module-preload'] -- Preload file for Lua module documentation pages. cfg['module-preload'] = 'Şablon:Belgeleme/modül-belge-önyükleme' ---------------------------------------------------------------------------------------------------- -- Print version configuration ---------------------------------------------------------------------------------------------------- -- cfg['print-subpage'] -- The name of the template subpage used for print versions. cfg['print-subpage'] = 'Yazdır' -- cfg['print-link-display'] -- The text to display when linking to the /Print subpage. cfg['print-link-display'] = '/Yazdır' -- cfg['print-blurb'] -- Text to display if a /Print subpage exists. $1 is a link to the subpage with a display value of cfg['print-link-display']. cfg['print-blurb'] = 'A print version of this template exists at $1.' .. ' If you make a change to this template, please update the print version as well.' -- cfg['display-print-category'] -- Set to true to enable output of cfg['print-category'] if a /Print subpage exists. -- This should be a boolean value (either true or false). cfg['display-print-category'] = true -- cfg['print-category'] -- Category to output if cfg['display-print-category'] is set to true, and a /Print subpage exists. cfg['print-category'] = 'Templates with print versions' ---------------------------------------------------------------------------------------------------- -- HTML and CSS configuration ---------------------------------------------------------------------------------------------------- -- cfg['templatestyles'] -- The name of the TemplateStyles page where CSS is kept. -- Sandbox CSS will be at Moduleocumentation/sandbox/styles.css when needed. cfg['templatestyles'] = 'Modül:Belgeleme/stiller.css' -- cfg['container'] -- Class which can be used to set flex or grid CSS on the -- two child divs documentation and documentation-metadata cfg['container'] = 'documentation-container' -- cfg['main-div-classes'] -- Classes added to the main HTML "div" tag. cfg['main-div-classes'] = 'documentation' -- cfg['main-div-heading-class'] -- Class for the main heading for templates and modules and assoc. talk spaces cfg['main-div-heading-class'] = 'documentation-heading' -- cfg['start-box-class'] -- Class for the start box cfg['start-box-class'] = 'documentation-startbox' -- cfg['start-box-link-classes'] -- Classes used for the [view][edit][history] or [create] links in the start box. -- mw-editsection-like is per Wikipedia:Village pump (technical)/Archive 117 cfg['start-box-link-classes'] = 'mw-editsection-like plainlinks' -- cfg['end-box-class'] -- Class for the end box. cfg['end-box-class'] = 'documentation-metadata' -- cfg['end-box-plainlinks'] -- Plainlinks cfg['end-box-plainlinks'] = 'plainlinks' -- cfg['toolbar-class'] -- Class added for toolbar links. cfg['toolbar-class'] = 'documentation-toolbar' -- cfg['clear'] -- Just used to clear things. cfg['clear'] = 'documentation-clear' ---------------------------------------------------------------------------------------------------- -- template configuration ---------------------------------------------------------------------------------------------------- -- cfg['fmbox-id'] -- The id sent to the "id" parameter of the template. cfg['fmbox-id'] = 'documentation-meta-data' -- cfg['fmbox-style'] -- The value sent to the style parameter of . cfg['fmbox-style'] = 'background-color: #ecfcf4' -- cfg['fmbox-textstyle'] -- The value sent to the "textstyle parameter of . cfg['fmbox-textstyle'] = 'font-style: italic' ---------------------------------------------------------------------------------------------------- -- Tracking category configuration ---------------------------------------------------------------------------------------------------- -- cfg['display-strange-usage-category'] -- Set to true to enable output of cfg['strange-usage-category'] if the module is used on a /doc subpage -- or a /testcases subpage. This should be a boolean value (either true or false). cfg['display-strange-usage-category'] = true -- cfg['strange-usage-category'] -- Category to output if cfg['display-strange-usage-category'] is set to true and the module is used on a -- /doc subpage or a /testcases subpage. cfg['strange-usage-category'] = 'Değişik ((belgeleme)) kullanan Vikipedi sayfaları' ------------------------------------------------------------------------------------------------------ -- End configuration -- -- Don't edit anything below this line. ---------------------------------------------------------------------------------------------------- -- return cfg
ocumentation -- -- Here you can set the values of the parameters and messages used in Moduleocumentation to -- localise it to your wiki and your language. Unless specified otherwise, values given here -- should be string values. ---------------------------------------------------------------------------------------------------- local cfg = {} -- Do not edit this line. ---------------------------------------------------------------------------------------------------- -- Protection template configuration ---------------------------------------------------------------------------------------------------- -- cfg['protection-reason-edit'] -- The protection reason for edit-protected templates to pass to -- Modulerotection banner. cfg['protection-reason-edit'] = 'şablon' --[[ ---------------------------------------------------------------------------------------------------- -- Sandbox notice configuration -- -- On sandbox pages the module can display a template notifying users that the current page is a -- sandbox, and the location of test cases pages, etc. The module decides whether the page is a -- sandbox or not based on the value of cfg['sandbox-subpage']. The following settings configure the -- messages that the notices contains. ---------------------------------------------------------------------------------------------------- --]] -- cfg['sandbox-notice-image'] -- The image displayed in the sandbox notice. cfg['sandbox-notice-image'] = '50px|alt=|link=' --[[ -- cfg['sandbox-notice-pagetype-template'] -- cfg['sandbox-notice-pagetype-module'] -- cfg['sandbox-notice-pagetype-other'] -- The page type of the sandbox page. The message that is displayed depends on the current subject -- namespace. This message is used in either cfg['sandbox-notice-blurb'] or -- cfg['sandbox-notice-diff-blurb']. --]] cfg['sandbox-notice-pagetype-template'] = 'deneme tahtasıdır' cfg['sandbox-notice-pagetype-module'] = 'deneme tahtasıdır' cfg['sandbox-notice-pagetype-other'] = 'deneme tahtası' --[[ -- cfg['sandbox-notice-blurb'] -- cfg['sandbox-notice-diff-blurb'] -- cfg['sandbox-notice-diff-display'] -- Either cfg['sandbox-notice-blurb'] or cfg['sandbox-notice-diff-blurb'] is the opening sentence -- of the sandbox notice. The latter has a diff link, but the former does not. $1 is the page -- type, which is either cfg['sandbox-notice-pagetype-template'], -- cfg['sandbox-notice-pagetype-module'] or cfg['sandbox-notice-pagetype-other'] depending what -- namespace we are in. $2 is a link to the main template page, and $3 is a diff link between -- the sandbox and the main template. The display value of the diff link is set by -- cfg['sandbox-notice-compare-link-display']. --]] cfg['sandbox-notice-blurb'] = 'Bu sayfa $2 şablonunun $1.' cfg['sandbox-notice-diff-blurb'] = 'Bu sayfa $2 ($3) şablonunun $1.' cfg['sandbox-notice-compare-link-display'] = 'fark' --[[ -- cfg['sandbox-notice-testcases-blurb'] -- cfg['sandbox-notice-testcases-link-display'] -- cfg['sandbox-notice-testcases-run-blurb'] -- cfg['sandbox-notice-testcases-run-link-display'] -- cfg['sandbox-notice-testcases-blurb'] is a sentence notifying the user that there is a test cases page -- corresponding to this sandbox that they can edit. $1 is a link to the test cases page. -- cfg['sandbox-notice-testcases-link-display'] is the display value for that link. -- cfg['sandbox-notice-testcases-run-blurb'] is a sentence notifying the user that there is a test cases page -- corresponding to this sandbox that they can edit, along with a link to run it. $1 is a link to the test -- cases page, and $2 is a link to the page to run it. -- cfg['sandbox-notice-testcases-run-link-display'] is the display value for the link to run the test -- cases. --]] cfg['sandbox-notice-testcases-blurb'] = 'Yapılan değişiklikler $1 sayfasında sınanabilir.' cfg['sandbox-notice-testcases-link-display'] = 'test senaryosu' cfg['sandbox-notice-testcases-run-blurb'] = 'Yapılan değişiklikler $1 ($2) sayfasında sınanabilir.' cfg['sandbox-notice-testcases-run-link-display'] = 'çalıştır' -- cfg['sandbox-category'] -- A category to add to all template sandboxes. cfg['sandbox-category'] = 'Şablon deneme tahtaları' ---------------------------------------------------------------------------------------------------- -- Start box configuration ---------------------------------------------------------------------------------------------------- -- cfg['documentation-icon-wikitext'] -- The wikitext for the icon shown at the top of the template. cfg['documentation-icon-wikitext'] = '50px|link=|alt=' -- cfg['template-namespace-heading'] -- The heading shown in the template namespace. cfg['template-namespace-heading'] = 'Şablon belgelemesi' -- cfg['module-namespace-heading'] -- The heading shown in the module namespace. cfg['module-namespace-heading'] = 'Modül belgelemesi' -- cfg['file-namespace-heading'] -- The heading shown in the file namespace. cfg['file-namespace-heading'] = 'Özet' -- cfg['other-namespaces-heading'] -- The heading shown in other namespaces. cfg['other-namespaces-heading'] = 'Belgeleme' -- cfg['view-link-display'] -- The text to display for "view" links. cfg['view-link-display'] = 'gör' -- cfg['edit-link-display'] -- The text to display for "edit" links. cfg['edit-link-display'] = 'değiştir' -- cfg['history-link-display'] -- The text to display for "history" links. cfg['history-link-display'] = 'geçmiş' -- cfg['purge-link-display'] -- The text to display for "purge" links. cfg['purge-link-display'] = 'temizle' -- cfg['create-link-display'] -- The text to display for "create" links. cfg['create-link-display'] = 'oluştur' ---------------------------------------------------------------------------------------------------- -- Link box (end box) configuration ---------------------------------------------------------------------------------------------------- -- cfg['transcluded-from-blurb'] -- Notice displayed when the docs are transcluded from another page. $1 is a wikilink to that page. cfg['transcluded-from-blurb'] = 'Yukarıdaki belgeleme içeriği $1 sayfasından yansıtılmaktadır.' --[[ -- cfg['create-module-doc-blurb'] -- Notice displayed in the module namespace when the documentation subpage does not exist. -- $1 is a link to create the documentation page with the preload cfg['module-preload'] and the -- display cfg['create-link-display']. --]] cfg['create-module-doc-blurb'] = 'Bu Scribunto modülü için bir belgeleme sayfası $1mak isteyebilirsiniz.' ---------------------------------------------------------------------------------------------------- -- Experiment blurb configuration ---------------------------------------------------------------------------------------------------- --[[ -- cfg['experiment-blurb-template'] -- cfg['experiment-blurb-module'] -- The experiment blurb is the text inviting editors to experiment in sandbox and test cases pages. -- It is only shown in the template and module namespaces. With the default English settings, it -- might look like this: -- -- Editors can experiment in this template's sandbox (edit | diff) and testcases (edit) pages. -- -- In this example, "sandbox", "edit", "diff", "testcases", and "edit" would all be links. -- -- There are two versions, cfg['experiment-blurb-template'] and cfg['experiment-blurb-module'], depending -- on what namespace we are in. -- -- Parameters: -- -- $1 is a link to the sandbox page. If the sandbox exists, it is in the following format: -- -- cfg['sandbox-link-display'] (cfg['sandbox-edit-link-display'] | cfg['compare-link-display']) -- -- If the sandbox doesn't exist, it is in the format: -- -- cfg['sandbox-link-display'] (cfg['sandbox-create-link-display'] | cfg['mirror-link-display']) -- -- The link for cfg['sandbox-create-link-display'] link preloads the page with cfg['template-sandbox-preload'] -- or cfg['module-sandbox-preload'], depending on the current namespace. The link for cfg['mirror-link-display'] -- loads a default edit summary of cfg['mirror-edit-summary']. -- -- $2 is a link to the test cases page. If the test cases page exists, it is in the following format: -- -- cfg['testcases-link-display'] (cfg['testcases-edit-link-display'] | cfg['testcases-run-link-display']) -- -- If the test cases page doesn't exist, it is in the format: -- -- cfg['testcases-link-display'] (cfg['testcases-create-link-display']) -- -- If the test cases page doesn't exist, the link for cfg['testcases-create-link-display'] preloads the -- page with cfg['template-testcases-preload'] or cfg['module-testcases-preload'], depending on the current -- namespace. --]] cfg['experiment-blurb-template'] = "Kullanıcılar denemelerini bu şablonun $1 ve $2 sayfalarında yapabilirler." cfg['experiment-blurb-module'] = "Kullanıcılar denemelerini bu şablonun $1 ve $2 sayfalarında yapabilirler." ---------------------------------------------------------------------------------------------------- -- Sandbox link configuration ---------------------------------------------------------------------------------------------------- -- cfg['sandbox-subpage'] -- The name of the template subpage typically used for sandboxes. cfg['sandbox-subpage'] = 'deneme' -- cfg['template-sandbox-preload'] -- Preload file for template sandbox pages. cfg['template-sandbox-preload'] = 'Şablon:Belgeleme/deneme-önyükleme' -- cfg['module-sandbox-preload'] -- Preload file for Lua module sandbox pages. cfg['module-sandbox-preload'] = 'Şablon:Belgeleme/modül-deneme-önyükleme' -- cfg['sandbox-link-display'] -- The text to display for "sandbox" links. cfg['sandbox-link-display'] = 'deneme tahtası' -- cfg['sandbox-edit-link-display'] -- The text to display for sandbox "edit" links. cfg['sandbox-edit-link-display'] = 'değiştir' -- cfg['sandbox-create-link-display'] -- The text to display for sandbox "create" links. cfg['sandbox-create-link-display'] = 'oluştur' -- cfg['compare-link-display'] -- The text to display for "compare" links. cfg['compare-link-display'] = 'fark' -- cfg['mirror-edit-summary'] -- The default edit summary to use when a user clicks the "mirror" link. $1 is a wikilink to the -- template page. cfg['mirror-edit-summary'] = '$1 için bir deneme versiyonu oluşturuldu' -- cfg['mirror-link-display'] -- The text to display for "mirror" links. cfg['mirror-link-display'] = 'yansıtma' -- cfg['mirror-link-preload'] -- The page to preload when a user clicks the "mirror" link. cfg['mirror-link-preload'] = 'Şablon:Belgeleme/yansıtma' ---------------------------------------------------------------------------------------------------- -- Test cases link configuration ---------------------------------------------------------------------------------------------------- -- cfg['testcases-subpage'] -- The name of the template subpage typically used for test cases. cfg['testcases-subpage'] = 'test' -- cfg['template-testcases-preload'] -- Preload file for template test cases pages. cfg['template-testcases-preload'] = 'Şablon:Belgeleme/test-önyükleme' -- cfg['module-testcases-preload'] -- Preload file for Lua module test cases pages. cfg['module-testcases-preload'] = 'Şablon:Belgeleme/modül-test-önyükleme' -- cfg['testcases-link-display'] -- The text to display for "testcases" links. cfg['testcases-link-display'] = 'test senaryosu' -- cfg['testcases-edit-link-display'] -- The text to display for test cases "edit" links. cfg['testcases-edit-link-display'] = 'değiştir' -- cfg['testcases-run-link-display'] -- The text to display for test cases "run" links. cfg['testcases-run-link-display'] = 'çalıştır' -- cfg['testcases-create-link-display'] -- The text to display for test cases "create" links. cfg['testcases-create-link-display'] = 'oluştur' ---------------------------------------------------------------------------------------------------- -- Add categories blurb configuration ---------------------------------------------------------------------------------------------------- --[[ -- cfg['add-categories-blurb'] -- Text to direct users to add categories to the /doc subpage. Not used if the "content" or -- "docname fed" arguments are set, as then it is not clear where to add the categories. $1 is a -- link to the /doc subpage with a display value of cfg['doc-link-display']. --]] cfg['add-categories-blurb'] = 'Lütfen kategorileri $1 alt sayfasına ekleyin.' -- cfg['doc-link-display'] -- The text to display when linking to the /doc subpage. cfg['doc-link-display'] = '/belge' ---------------------------------------------------------------------------------------------------- -- Subpages link configuration ---------------------------------------------------------------------------------------------------- --[[ -- cfg['subpages-blurb'] -- The "Subpages of this template" blurb. $1 is a link to the main template's subpages with a -- display value of cfg['subpages-link-display']. In the English version this blurb is simply -- the link followed by a period, and the link display provides the actual text. --]] cfg['subpages-blurb'] = '$1.' --[[ -- cfg['subpages-link-display'] -- The text to display for the "subpages of this page" link. $1 is cfg['template-pagetype'], -- cfg['module-pagetype'] or cfg['default-pagetype'], depending on whether the current page is in -- the template namespace, the module namespace, or another namespace. --]] cfg['subpages-link-display'] = 'Bu $1 ile ilgili alt sayfalar için buraya tıklayınız' -- cfg['template-pagetype'] -- The pagetype to display for template pages. cfg['template-pagetype'] = 'şablon' -- cfg['module-pagetype'] -- The pagetype to display for Lua module pages. cfg['module-pagetype'] = 'modül' -- cfg['default-pagetype'] -- The pagetype to display for pages other than templates or Lua modules. cfg['default-pagetype'] = 'sayfa' ---------------------------------------------------------------------------------------------------- -- Doc link configuration ---------------------------------------------------------------------------------------------------- -- cfg['doc-subpage'] -- The name of the subpage typically used for documentation pages. cfg['doc-subpage'] = 'belge' -- cfg['file-docpage-preload'] -- Preload file for documentation page in the file namespace. cfg['file-docpage-preload'] = 'Şablon:Belgeleme/dosyaalanı-önyükleme' -- cfg['docpage-preload'] -- Preload file for template documentation pages in all namespaces. cfg['docpage-preload'] = 'Şablon:Belgeleme/önyükleme' -- cfg['module-preload'] -- Preload file for Lua module documentation pages. cfg['module-preload'] = 'Şablon:Belgeleme/modül-belge-önyükleme' ---------------------------------------------------------------------------------------------------- -- Print version configuration ---------------------------------------------------------------------------------------------------- -- cfg['print-subpage'] -- The name of the template subpage used for print versions. cfg['print-subpage'] = 'Yazdır' -- cfg['print-link-display'] -- The text to display when linking to the /Print subpage. cfg['print-link-display'] = '/Yazdır' -- cfg['print-blurb'] -- Text to display if a /Print subpage exists. $1 is a link to the subpage with a display value of cfg['print-link-display']. cfg['print-blurb'] = 'A print version of this template exists at $1.' .. ' If you make a change to this template, please update the print version as well.' -- cfg['display-print-category'] -- Set to true to enable output of cfg['print-category'] if a /Print subpage exists. -- This should be a boolean value (either true or false). cfg['display-print-category'] = true -- cfg['print-category'] -- Category to output if cfg['display-print-category'] is set to true, and a /Print subpage exists. cfg['print-category'] = 'Templates with print versions' ---------------------------------------------------------------------------------------------------- -- HTML and CSS configuration ---------------------------------------------------------------------------------------------------- -- cfg['templatestyles'] -- The name of the TemplateStyles page where CSS is kept. -- Sandbox CSS will be at Moduleocumentation/sandbox/styles.css when needed. cfg['templatestyles'] = 'Modül:Belgeleme/stiller.css' -- cfg['container'] -- Class which can be used to set flex or grid CSS on the -- two child divs documentation and documentation-metadata cfg['container'] = 'documentation-container' -- cfg['main-div-classes'] -- Classes added to the main HTML "div" tag. cfg['main-div-classes'] = 'documentation' -- cfg['main-div-heading-class'] -- Class for the main heading for templates and modules and assoc. talk spaces cfg['main-div-heading-class'] = 'documentation-heading' -- cfg['start-box-class'] -- Class for the start box cfg['start-box-class'] = 'documentation-startbox' -- cfg['start-box-link-classes'] -- Classes used for the [view][edit][history] or [create] links in the start box. -- mw-editsection-like is per Wikipedia:Village pump (technical)/Archive 117 cfg['start-box-link-classes'] = 'mw-editsection-like plainlinks' -- cfg['end-box-class'] -- Class for the end box. cfg['end-box-class'] = 'documentation-metadata' -- cfg['end-box-plainlinks'] -- Plainlinks cfg['end-box-plainlinks'] = 'plainlinks' -- cfg['toolbar-class'] -- Class added for toolbar links. cfg['toolbar-class'] = 'documentation-toolbar' -- cfg['clear'] -- Just used to clear things. cfg['clear'] = 'documentation-clear' ---------------------------------------------------------------------------------------------------- -- template configuration ---------------------------------------------------------------------------------------------------- -- cfg['fmbox-id'] -- The id sent to the "id" parameter of the template. cfg['fmbox-id'] = 'documentation-meta-data' -- cfg['fmbox-style'] -- The value sent to the style parameter of . cfg['fmbox-style'] = 'background-color: #ecfcf4' -- cfg['fmbox-textstyle'] -- The value sent to the "textstyle parameter of . cfg['fmbox-textstyle'] = 'font-style: italic' ---------------------------------------------------------------------------------------------------- -- Tracking category configuration ---------------------------------------------------------------------------------------------------- -- cfg['display-strange-usage-category'] -- Set to true to enable output of cfg['strange-usage-category'] if the module is used on a /doc subpage -- or a /testcases subpage. This should be a boolean value (either true or false). cfg['display-strange-usage-category'] = true -- cfg['strange-usage-category'] -- Category to output if cfg['display-strange-usage-category'] is set to true and the module is used on a -- /doc subpage or a /testcases subpage. cfg['strange-usage-category'] = 'Değişik ((belgeleme)) kullanan Vikipedi sayfaları' ------------------------------------------------------------------------------------------------------ -- End configuration -- -- Don't edit anything below this line. ---------------------------------------------------------------------------------------------------- -- return cfg